Taking apart and also rebuilding a laptop will enable you to readjust out components, clean your system, or scrap the internal materials of the laptop.

You are watching: When removing the cover why should you take care to remove only the screws that hold the cover on


This is a general guide, which covers the most common laptop configuration. Laptop manufacturers vary, however, and some items could be in a slightly different place or linked differently. In general, the process is to eliminate the components you have the right to reach first, being careful to disconnect any kind of cables to the component first. Since there is small space in laptops, over there is also very small slack in any type of cables, it’s basic to big the cables or cause damage come the connector if you nothing disconnect the cable before attempting to eliminate the component.

If you are going to rebuild the laptop, it’s benidormclubdeportivo.org to record where every component goes, i m sorry cables are linked to it, and where the slack from the cable is stored. Take a picture of each step to help you reassemble her laptop in ~ the finish of the process. Keep mindful track that the screws and also where lock go, as different sizes and kinds of screws have the right to be provided on the same component. To reduce any type of potential mix-ups, re-insert the screws in the feet they come from, or ice the screws close to the suitable hole ~ above the component.


You will need a tiny Phillips-head screwdriver and possibly a flathead screwdriver, relying on the do of her laptop. To avoid the opportunity of revolution electricity, wear an ESD wristband, or touch an unpainted item of steel to discharge any collected static electricity. If you move away from her workspace, particularly if girlfriend walk on carpet, touch an unpainted piece of steel again prior to resuming your work.


Person emotional an unpainted steel surface in a laptop to discharge static electricity

Turn turn off the computer, unplug it, and remove the battery by relocating the locking slider come the unlock position. There will certainly be one more slider, move it in the direction indicated, then pull the battery right out. Press the power switch for in ~ least 5 seconds to discharge any remaining electrical power in the system.


Remove the earlier panels through unscrewing all the accessible screws. Be certain to look under the rubber feet and behind sticker labels for any kind of hidden screws. If you space going come reassemble the laptop, organize the covers therefore you can put them ago in the correct places later.


Screwdriver removing screw from earlier of laptop

Many contents will it is in immediately accessible after remove the covers. Generally, you can remove the storage drive, memory, and also wireless map first.

Disconnect the cables, then eliminate the warehouse drive. Sometimes laptop manufacturers execute not administer a connector top top ribbon cables, rather the cable itself is clamped right into the component. If this is the case, you’ll have to open the clamp with the flathead screwdriver and remove the ribbon cable. The storage drive can be screwed in - if there are screws, eliminate them, maintaining track of whereby each one goes.


Person remove the storage journey from the inside of a laptop

Remove the memory modules by pushing down on the clips that host each module in place, utilizing your fingers or a spudger tool. The module will certainly pop up at a 30-degree angle, enabling you to remove it. Nothing touch the gold pins ~ above the module. If you’re not reassembling the computer, uncover out just how your old memory have the right to be placed to an excellent use.


Person unclipping a ram memory module indigenous the inside of a laptop

The small gold-tipped cover close to the wireless map is the wireless antenna. Pry this off v the flathead screwdriver, then eliminate the wireless card making use of clips comparable to the storage modules.


The next step is to eliminate the hinge cover plate and also keyboard. Part manufacturers use screws on the hinge sheathe plate, some execute not. If there are screws, they have the right to be inside the removed battery area or top top the hinge cover plate. Inspect for and also remove any kind of screws, then try to pry increase the hinge covering plate. Sometimes there is a tiny notch that makes this easier. The plate should come loose easily, if over there is an ext than a little resistance, check again because that screws. Then, remove the hinge cover plate entirely.

Remove the screws uncovered under the hinge cover plate to eliminate the keyboard. If the keyboard does not desire to move when you lift it up and forward, inspect for extr screws.

Do not pull out the ribbon cable under the key-board when you remove the keyboard. It will certainly be organized in ar by a plastic hinge. Background the hinge through your finger or a plastic spudger tool.

Remove any kind of other cables in the area under the keyboard. The connectors move either up or forward. If the cable has a tiny plastic plug, it simply pulls out.


To remove the laptop screen, remove the antenna cable and also the LCD data cable that connects native the area the housed the keyboard to the bottom sheet of the screen.

Take out the screws that attach the display screen to the hinge area. They can be ~ above the earlier of the display, or top top the inside, where the keyboard was. Gently remove the display screen assembly.


Closeup that a laptop display with framework removed exposing screws

On the display remove the black rubber pads roughly the screen to access much more screws. Use your fingernails to remove the pads, aggressive tools can tear the pads. Eliminate all the screws you find. Pry the front cover of the screen away from the ago part. If you feel resistance, look for a screw you can have missed.

To eliminate the screen, eliminate the very little screws on the side of the LCD screen. Do not touch the back part of the screen. You have the right to now access the fluorescent lamp inverter.


Pry the situation on the bottom of the laptop apart.

Remove the touchpad and continue to eliminate screws and disconnect the cables attached come the motherboard. Friend don’t always have to eliminate all the screws on the motherboard, several of them organize the motherboard components to the motherboard. Part manufacturers will note the screws to eliminate the motherboard through a letter or one arrow.

After the screws have been removed, the motherboard need to come out with no resistance. If there is resistance, inspect for an ext screws.


To reassemble your laptop, perform each action in turning back order. Be sure that connectors room seated securely, cables aren’t kinked or stretched, and also that every the screws go earlier into their correct holes. It’s normally a good idea to alternate tightening screws ~ above a part to prevent cracking the part. For the keyboard ribbon cable, the lighter next goes increase to prevent a twisted in the cable.

Taking apart and rebuilding a laptop is one accomplishment. Congratulations!



Shop memory Now

Related Articles


Computer Recycling: just how to Dispose of Old Computers

might 27, 2021


Thinking of obtaining rid of an old computer? find out the best method to dispose or recycle old computers – head to an essential for much more information.


Want to develop your very own PC but don’t know where come start? discover all the an easy components you need to get started.

See more: What Is A Meter Stick Used For ? What Is The Function Of Meter Stick


Are you upgrading PC components or your case and need to know how to disassemble and also rebuild her desktop? discover out just how at benidormclubdeportivo.org.