Flathead screwdrivers space handy for multiple projects, from transforming screws to opening a fresh have the right to of paint. But, walk you know that this tool can additionally be provided to jump a car? while you should use jumper cables if you have them, friend can try this DIY in an emergency if you have actually a flathead screwdriver handy.

You are watching: How to start a car with a screwdriver on the starter

Warning: A flathead screwdriver can be offered to run a automobile in two different ways. However, unless you very own the vehicle or have the permission from the owner, it’s illegal to perform so. In addition, with countless newer vehicles this trick will not work because the components are i ordered it differently. Try this job at your very own risk.


Check out screwdrivers on Amazon

Step 1 – Locating the Coil Wire

First, popular music the hood open, and also look because that the red coil wire. It will certainly be in various places, relying on the dimension or version of her car.

In four-cylinder vehicles, you can expect to discover it to the ideal of the center of the engine. In six-cylinder engines, girlfriend can find it come the left of center of the engine. If you have actually an eight-cylinder engine, look toward the behind of the engine because that it.

Step 2 – giving Power to the Dashboard

Now, take it a wire and also run it from the confident terminal top top the battery. You"ll watch a red wire running off the coil the you can attach it to. Alternatively, friend can connect the wire directly to the coil, ~ above the positive side. This will give power to your dashboard.

Step 3 – Locating the Solenoid

This an approach will only work if the starter solenoid because that your car is under the steering wheel, together it usually is. If your vehicle is a rod shift, placed it in neutral and ensure that the parking brake is steady on.

To get to the begin solenoid, place your flathead driver on the center top that the steering column, wherein you view the space that separates the steering obelisk from the steering wheel. Then, bring pressure down onto the screwdriver. This will force the locking pin away and give you access to the solenoid.


Step 4 – Jump-Starting the Car

Warning: Make certain you only organize the driver by the insulated handle, or you will get a serious electrical shock.

There will be a little wire at the top of the solenoid. Below it, girlfriend will view the positive cable for the battery. Put the metal component of her flathead screwdriver across this. The engine will now start.

Trying an alternate Method

Alternatively, you have the right to start your vehicle with a drill. Through a small bit, place the drill about 2/3 the way up the ignition keyhole ~ above the steering column. Begin the drill, and also push the little bit in come the same depth as a key. This will certainly take out all the lock pins. Now, you have the right to jam your level head screwdriver into the ignition, and turn the to begin the engine together if it were a key.

See more: Explain What Does Constant Rate Of Change Mean S In This Context

When you acquisition through web links on our site, we may earn commissions at no expense to you.