I collection stamps together a hobby. I always face an obstacle peeling off the rubber stamp without damaging the the perforation roughly it. Also it is complicated to eliminate the adhesives and also envelope paper stuck behind the stamp.

I generally peel turn off the stamp v my hands v utmost care, but sometimes the stamps get damaged or the adhesives stick to the stamp itself.

You are watching: How to remove stamps from paper

What is a much better solution because that removing a stamp cleanly and also neatly native an envelope?


*

*

METHOD 1 - Microwave

Place pair of drops of water ~ above the stamp in addition to the envelope and also heat it with microwave because that 30-45 secs. Stamp will come off from that paper.

Do not overheat the it together the rubber stamp will become curled

METHOD 2 - Soaking:

Cut the section of envelope in addition to stamp without damaging it. Trim off any excess paper. Placed it in the cup that cold water with stamp dealing with upward. Stamp will certainly float on the water. This is being done to wet the back paper and adhesive and also to avoid the threat of colors to run off.

Depending top top the thickness that the paper and adhesive used, soaking time may vary. Usually around 10 mins for thin paper and up to 1 hour because that thick file and cards. Dry it with document towel or few mins on sun light.


*

Forty years or therefore ago, we offered to do this by putting a damp record towel over the stamp and heating with an electric iron collection to "cotton". The heavy steam would debond the adhesive, releasing the stamp from the envelope without damage. This only takes 10-15 seconds.

I should include that this and also other water or vapor methods only job-related with stamps that need moistening come apply. Newer US stamps have a peel-and-stick adhesive that will certainly respond far better to the lighter liquid (naptha, Goof-Off, etc.) solvents that attack the push sensitive adhesive.


*

I have done this with steam; organize the stamp next to a boiling kettle so the heavy steam wets and also heats the glue, climate it will certainly peel off. You can burn your fingers for this reason it"s never boring.

See more: How Much Should A Dime Weigh ? Weight Of Dime


*

Use Ronsonol or a similar brand that lighter liquid (the kind used to refill Zippo-style lighters NOT BUTANE). Soak the stamp with one or two drops of lighter fluid, an especially around the edges. After a few seconds girlfriend should be able to lift one leaf of the stamp. If it"s a big stamp or sticker you may have to apply an additional drop or 2 of lighter fluid under the edge therefore it can reach the adhesive close to the center. Don"t pressure it if the rubber stamp doesn"t come off easily. Apply another drop and also give the a few more second. An plain size stamp have to require simply one or 2 drops that lighter fluid and 15-30 seconds to loosen the adhesive and also remove the stamp plus one more minute or 2 for the lighter fluid to wait dry.

The lighter fluid will dried clean without damaging the stamp or the envelope. It will not leave a watermark or cause the ink to run. (I use this trick to eliminate price tags and labels from supplied books.) part adhesives are much more adhesive than others, however I"ve never encountered an adhesive brand or sticker that i couldn"t remove with this method. The procedure is easy and also straightforward yet you may want to execute a practice run top top a rubber stamp you don"t care around damaging. Observe the noticeable safety precautions if working v a highly flammable liquid. Don"t work near an open up flame. Don"t smoke. Ensure enough ventilation.